G-Shock GT-000C-1 - Manual (Page 4)

1633/1814-4
Personal identification data
• This watch has three built-in titles for personal identification data: CREDIT
(for a credit card number), LICENCE (for a license number), and
PASSPORT (for a passport number). You can use these built-in title as
they are, or append eight more characters to a built-in title to indicate a
credit card company name, for example.
• In addition to the three built-in titles, you can also input your own titles up to
eight characters long for the two undefined items.
• You can input number up to 12 digits long for each personal identification
data item.
To input personal identification data
1. In the Vital Statistics/ID Mode, display the
personal identification data screen where you
want to input data.
• See “To recall Vital Statistics/ID data” for details
on how to switch between data screens.
2. Hold down A until the flashing cursor appears
in the text area of the display.
3. Input a text in the text area if you want.
• In the case of a built-in title, you can append up to eight characters to the
preset title. For the undefined data items, you can input titles up to 8
characters long.
• To use a built-in title as it is without appending text, press M eight times to
move the cursor to the number area.
Use B and C to input characters, and M to move the cursor around the
display. For details, see “INPUTTING TEXT”.
4. After you input your text, use M move the cursor to the number area and
input number data.
• You can input up to 12 digits in the number area.
• You can input only hyphens, numbers and spaces in the number area (you
cannot input text).
5. After inputting your data, press A to store it and return to the screen you
started out from in step 1 of this procedure.
To edit Vital Statistics/ID Mode data
1. In the Vital Statistics/ID Mode, scroll through the data items and display
the one you want to edit.
2. Hold down A until the data on the display starts to flash.
3. Use M to move the flashing to the part of the data item you want to
change.
4. Use B and C to change the displayed data.
• For details on inputting data, see the sections of this manual that describes
input for each screen.
5. After making the changes that you want, press A to store them and return
to the screen you started out from in step 1 of this procedure.
To delete Vital Statistics/ID Mode data items
1. In the Vital Statistics/ID Mode, scroll through the data items and display
the one you want to delete.
2. Hold down A until the data on the display starts to flash.
3. Press B and C at the same time to delete the data item.
4. Press A to return to the screen you started out from in step 1 of this
procedure.
ALARM MODE
When the Daily Alarm is switched on, the alarm
sounds for 20 seconds at the preset time each
day. Press any button to stop the alarm after it
starts to sound.
When the Hourly Time Signal is switched on, the
watch beeps every hour on the hour.
To set the alarm time
1. Hold down A while in the Alarm Mode until the
hour digits start to flash on the display. The
hour digits flash because they are
selected.
• This operation will switch the Daily Alarm on
automatically.
2. Press M to change the selection in the following
sequence.
3. Press C to increase the selected digits or B to decrease them. Holding
down either button changes the selection at high speed.
• The format (12-hour and 24-hour) of the alarm time matches the format you
select for normal timekeeping.
• When setting the alarm time using the 12-hour format, take care to set the
time correctly as morning (no indicator) or afternoon (P).
4. After you set the alarm time, press A to return to the Alarm Mode.
TIME TEL SCH VIT ALM STW
B
M
A
C
Cursor
Number area
Text area
TIME TEL SCH VIT ALM STW
B
M
A
C
Alarm on indicator
Hour Minutes
Mode indicator
Hourly time signal
on indicator
Hour
Minutes
TIME TEL SCH VIT ALM STW
B
M
A
C
(a) Elapsed time measurement
(b) Split time measurement
(c) Split time and 1st-2nd place times
Start
Start
Stop
Stop
Split release
Split release
Re-start
Stop
Record time of
second runner. Second runner finishes.
Record time of first runner.
Split
Split
First runner
finishes.
Clear
Clear
Clear
▼
▼
▼
▼▼
▼
▼▼
▼
▼▼
Start Stop
▼ C C C C B
C B
B C
B
C
C
B
B
B
1/100 second
Mode indicator
Minutes
Seconds
Hours
To switch the Daily Alarm and Hourly Time Signal on
and off
Press C while in the Alarm Mode to change the status of the Daily Alarm and
Hourly Time Signal in the following sequence.
To test the alarm
Hold down B while in the Alarm Mode to sound the alarm.
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed
time, split times, and two finishes. The range of
the stopwatch is 23 hours, 59 minutes, 59.99
seconds.
[Alarm ON indicator/Hourly Time Signal ON indicator]
Both ON Both OFF Daily Alarm
Only Hourly Time
Signal only
TIME TEL SCH VIT ALM STW
B
M
A
C
INPUTTING TEXT
The following describes how to input text in the Telememo Mode, Schedule-
memo Mode, and Vital Statistics/ID Mode.
How to input characters
1. When the cursor is blinking in the text area of
the display, use B and C to scroll through the
available letters, numbers and symbols, in the
following sequence.
• Holding down either button scrolls through at high speed.
• You can input Japanese characters (katakana), English alphabetic
characters, numbers, and symbols in the text area. For a complete list of
characters you can input, see “CHARACTER LIST” at the back of this
manual.
2. When the character you want at the cursor position is shown, press M to
move the cursor to the right.
3. Repeat steps 1 and 2 until your text is complete.
• You can input only hyphens, numbers and spaces in the number area.
Each press of
B or C changes the input at the current cursor location in
the following sequence.
x (space) 0 to 9
Press B
Press C
• If you do not perform any button operation for about two or three minutes
while the cursor is on the display, the watch automatically returns to the
normal data display (the cursor disappears).
Cursor Text area
Number area
. - / ) (
Press C Press B
(space)
(Japanese)
0 to 9 to
(Alphabet)
A to Z