Using mobile link with a mobile phone, Getting ready, 1 installing required app on your phone – G-Shock GBA-400-1A User Manual
Page 2: 2 configuring bluetooth settings, 3 pairing the watch with a phone, Auto time adjustment, Operation guide 5413
Using Mobile Link with a
Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch
time setting is adjusted automatically and
you can perform music app operations
from the watch.
Note
●
This section describes watch
and phone operations.
X
: Watch operation
Y
: Phone operation
Getting Ready
A
Installing required app on your
phone
To use the watch with a phone, first tap
one of the links below and install the
CASIO G-SHOCK+ app on the phone.
●
iOS (iPhone)
●
Android (GALAXY, etc.)
Note
●
In addition to G-SHOCK+, there
is also another G-SHOCK music
app named G’MIX App. You can
install G’MIX App on your phone
by starting up G-SHOCK+ and
then following the instructions
that appear on the screen.
B
Configuring Bluetooth settings
Enable the phone’s Bluetooth.
iPhone Users
1. Y On the Home Screen, tap
“Settings” n “Bluetooth”.
2. Y Enable “Bluetooth”.
3. Y Tap “Settings” to return to the
“Settings” screen.
4. Y Tap in the following sequence:
“Privacy” n “Bluetooth Sharing”.
5. Y Enable “G-SHOCK+”.
Android Users
Enable Bluetooth.
●
If you are presented with a choice
between “Bluetooth” and “Bluetooth
Smart”, select “Bluetooth Smart”.
Note
●
For details about setting
procedures, see your phone
documentation.
C
Pairing the watch with a phone
Before you can use the watch in
combination with a phone, you first need
to pair them. Once the watch is paired
with a phone, you normally do not need
to pair them again.
1. Move the phone you want to pair with
close to (within one meter of) the
watch.
2. Y On the Home Screen, tap the “G-
SHOCK+” icon.
●
If G’MIX App is not installed on the
phone, the G’MIX App installation
screen will appear. Follow the
instructions that appear to install
the app.
3. Y Select “GBA-400” and then tap
“Next”.
4. Y Perform operations as instructed
by the app.
●
If a pairing prompt message
appears, perform the operation
shown on the phone screen.
●
After pairing is complete, the
Bluetooth indicator will appear on
the watch to indicate it is
connected with the phone.
Bluetooth indicator
5. Y Tap “Start”.
This displays the G-SHOCK+ top
screen.
Note
●
If pairing fails for some reason,
perform the procedure again
from step 2.
Auto Time Adjustment
The watch can be set to adjust its time
setting automatically each day in
accordance with the phone time.
●
Using Auto Adjust
Schedule auto adjust for times the watch
and phone are normally close to each
other as shown in the illustration below.
●
While you sleep at night
22:00
●
While you work at your desk in the
afternoon
14:00
Important!
●
Even if there is no Bluetooth
connection when the auto adjust
time is reached, a connection is
established and adjustment is
performed automatically. The
connection is automatically
terminated after time
adjustment is complete.
●
The watch adjusts its time
setting automatically in
accordance with the phone time
while they are connected with
each other.
Operation Guide 5413
2