MagnaFlow AUDI A6 QUATTRO Stainless Cat-Back System PERFORMANCE EXHAUST User Manual

MagnaFlow For the car

Advertising
background image

Step 1: Begin removing your OEM exhaust system
by first loosening the clamps attaching the x-over
assembly at the outlet of the catalytic converters.
These front clamps will be re-used. Working front to
rear detach all hangers from the rubber insulators.
Retain the insulators as they will be used to install
your new exhaust system. Remove the system from
the vehicle.

Step 2: Install your new MAGNAFLOW system by
first attaching the X-Pipe Assembly to the catalytic
converter outlets using the OEM clamps. Next, slip
the Resonater Assemblies onto the X-Pipe and
secure using the supplied 2.25" clamps. Finish by
installing the Muffler Assemblies in a similar fashion.
Locate all hangers into the rubber insulators.

Step 3: With all components mounted loosely, adjust
the system for overall aesthetics and clearance of
frame & bodywork. (MAGNAFLOW recommends at
least 1/2" of clearance between the exhaust system
and any body panels to prevent heat-related body
damage or fire.)

Step 4: Once a final position has been chosen for the
new system, evenly tighten all fasteners from front to
rear. The supplied band clamps must be VERY tight
to properly align the pipes and prevent leaks
(Approximately 40ft-lbs). Inspect all fasteners after
25-50 miles of operation and retighten if necessary.

Mufflers, Converters,

Systems and Tips

INSTALLATION INSTRUCTIONS

16477

2000-2003 Audi A6 Quattro 4.2L

Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.

** Magnaflow Performance Exhaust recommends professional
installation on all their products

Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688

Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500

08/21/12
Rev: 000

Muffler Assy D/S

Muffler Assy P/S

X-Pipe
Assy

[4] 2.25"
Clamps

D/S Resonator
Assy

P/S Resonator
Assy

Advertising