Operation – Ryobi ES1500 User Manual
Page 5
5 – English
App images may vary.
OPERATION
To use the device as a transfer level:
See Figures 3 - 4.
Press “level” on the
mode selector.
To obtain a flat level, place your smartphone on the surface
you want to reference and tilt it until the
leveling circles
are aligned.
To obtain a horizontal level, hold your smartphone upright
or sideways and tilt it until the
reference angle is at 0
°.
NOTE: Depending on your device’s settings, the laser beam
may turn on or blink when level is achieved.
Global Settings/Settings
See Figure 5.
Tap the
Settings icon on the RYOBI
™
Phone Works
™
home
screen to make changes based on your preferences.
Settings specific to some app segments can only be
changed within the app segment.
Tap
Save to apply changes.
You may also
LOGOUT from this screen, view the Terms
and Conditions, and view the Privacy Policy.
Fig. 3
Fig. 4
Fig. 5
Mode Selector
Leveling Circle
Settings Icon
Reference level line
0°
Reference Angle