Ryobi SPC18 - Manual (Page 3)

3
RULES FOR SAFE OPERATION
READ ALL INSTRUCTIONS
■ Know your product. Read the operator’s manual
carefully. Learn the product’s applications and
limitations as well as the specific potential haz-
ards related to this product.
■ Read thoroughly these instructions and the in-
structions for each tool before using this
“Six
Pack.”
■ Use safety equipment. Always wear eye protec-
tion. Dust mask, non-skid safety shoes, hard hat, or
hearing protection must be used for appropriate con-
ditions.
■ Stay alert and exercise control. Watch what you
are doing and use common sense. Do not operate
tool when you are tired. Do not rush.
■ Use the right tool. Do not force the tool or attach-
ment to do a job for which it was not designed. Do
not use it for a purpose not intended.
■ Do not overreach. Keep proper footing and balance
at all times.
■ Never stand or sit on the case. Serious injury could
result if the case is tipped, jarred, or rolled.
■ Never stand in the drawers or use the drawers
of the Six Pack case as a ladder.
■ Dress properly. Do not wear loose clothing, gloves,
neckties, rings, bracelets, or other jewelry. They can
get caught and draw you into moving parts. Rubber
gloves and nonslip footwear are recommended when
working outdoors. Also wear protective hair cover-
ing to contain long hair.
■ Do not lift the case without help. The “Six Pack”
weighs 70 lbs. Hold it close to your body, keep your
knees bent, and lift with your legs. Ignoring these
precautions could result in back injury.
■ Keep children and visitors away. All visitors should
wear safety glasses and be kept a safe distance from
the work area. Do not let visitors contact tool while
operating.
■ Make product child-proof with padlocks.
■ Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
■ Always place each tool, accessory, and battery
in their specific location in the case to assure
proper balance and prevent shifting.
■ Remove battery pack from all tools and place the
switch in the locked or off position before stor-
ing the tool. Such preventive safety measures re-
duce risk of starting the tool accidentally.
■ Always store batteries in the case, stem side down
when not being charged or in use.
■ Always make sure the contents are secure and
that all latches are securely latched before mov-
ing the
“Six Pack.” If transporting, padlock the
latches for additional security.
■ Do not place any object on the top surface when
the miter saw is in use. Clutter invites accidents
and can intefere with the safe operation of the saw.
■ Maintain tools with care. Keep tools sharp and
clean for better and safer performance. Follow in-
structions for lubricating and changing accessories.
■ When servicing use only identical Ryobi replace-
ment parts. Use of any other parts may create a
hazard or cause product damage.
■ Use recommended accessories. The use of im-
proper accessories may cause risk of injury. Refer
to this operator’s manual for recommended acces-
sories.
■ Save these instructions. Refer to them frequently
and use them to instruct others who may use this
tool. If you loan someone this tool, loan them
these instructions also. Following this rule will
reduce the risk of electric shock, fire, or serious
personal injury.