Ryobi WS721 - Manual (Page 5)

5 — English
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SyMBOL SIGNAL MEANING
DANGER:
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-
tion of these symbols will allow you to operate the tool better and safer.
Safety Alert
SyMBOL NAME DESIGNATION/ExPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Indicates a potential personal injury hazard.
.../min Per Minute
Class II Construction
no No Load Speed
Direct Current
Alternating Current
min Minutes
W Watt
Hz Hertz
A Amperes
V Volts
SyMBOLS
Read The Operator’s Manual
No Hands Symbol
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye, Ear, & Breathing
Protection
Failure to keep your hands away from the wheel will result in
serious personal injury.
Wet Conditions Alert
Electrocution Failure to properly ground can result in electrocution.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1 along with hearing and breathing protection.