Ryobi WS750L - Manual (Page 5)

5 — English
 ALWAyS SECURE WORK firmly against the rip guide or
bevel block.
 NEVER stand or have any part of your body in line with
the path of the wheel.
 NEVER attempt to free a stalled wheel without first turning
the saw
OFF and disconnecting the saw from the power
source.
 IF THE POWER SUPPLy CORD IS DAMAGED, it must
be replaced only by the manufacturer or by an authorized
service center to avoid risk.
 AVOID AWKWARD OPERATIONS AND HAND
POSITIONS where a sudden slip could cause your hand
to move into the cutting tool.
 MAKE SURE THE WORK AREA HAS AMPLE LIGHTING
to see the work and that no obstructions will interfere with
safe operation BEFORE performing any work using the
saw.
 ALWAyS TURN OFF SAW before disconnecting it, to
avoid accidental starting when reconnecting to power
supply.
 AVOID direct eye exposure when using the laser guide.
 THIS TOOL should have the following markings:
a) Wear eye protection.
b) Use splash guard for every operation for which it
can be used.
c) Disconnect saw before servicing, when changing
cutting wheels, and cleaning.
d) Use tool only with smooth edge cutting wheels free
of openings, grooves, and teeth.
e) Replace damaged cutting wheel before operating.
f) Do not fill water bath above water fill line.
 SAVE THESE INSTRUCTIONS. Refer to them
frequently and use to instruct other users. If you loan
someone this tool, loan them these instructions too.
SPECIFIC SAFETy RULES