Ryobi P580 - Manual (Page 6)

6 — English
SyMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SyMBOL SiGNAL MEANiNG
dANGER:
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
wARNiNG:
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
cAUTiON:
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
cAUTiON:
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SyMBOL NAME dESiGNATiON/ExPLANATiON
Safety Alert Indicates a potential personal injury hazard.
V Volts Voltage
Direct Current Type or a characteristic of current
no
No Load Speed Rotational speed, at no load
Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
min Minutes Time
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye, Ear, & Breathing
Protection Wear eye protection with side shields marked to comply with ANSI
Z87.1 and hearing protection.
No Hands Symbol
Failure to keep your hands away from the cutting wheel will result
in serious personal injury.
Li - Ion
Recycle Symbols
This product uses lithium-ion or nickel-cadmium batteries. Local,
state or federal laws may prohibit disposal of batteries in ordinary
trash. Consult your local waste authority for information regarding
available recycling and/or disposal options.