Pilz PSS67 F 16DI SB-T - Manual (Page 41)

9 - 1 Operating Manual: PSS67 F 16DI SB-T
Operation and Maintenance
Operation and maintenance
Commissioning
• Install the digital input module as described in the chapter entitled
“Installation” on page 5-1.
• Connect the inputs and outputs as described in the chapter entitled
“Wiring the Inputs and Outputs” on page 7-1.
• Connect the supply voltage for the digital input module as described in
the chapter entitled “Supply Voltage” on page 6-1.
• Connect SafetyBUS p
• Set the device address.
• Configure the module using the system software’s configurator