Nexen BTBA-10 927409 - Manual (Page 16)

16 FORM NO. L-21180-E-0111
ANTI-ROTATION
Assembled View
Exploded View
Machine Frame
Threaded standoff with
hole to accept a pin or
the head of a M12 Screw
M12 Screw
Figure 21
The BTBA allows for several anti-rotation methods. The
primary goal is to prevent the brake actuator from rotating.
Nexen suggests one of the following possibilities:
• Bracket (See Figure 20 below)
• Threaded Spacer (See Figure 21 below)
• Threaded Rod and Jam Nuts
Anti-Rotation Bracket
Machine Frame
Side View Isometric View
Figure 20
Please note that these are only suggestions. For further
assistance, please contact Nexen.