Nexen Size 18 964104 - Manual (Page 11)

5 FORM NO. L-20244-D-0300
76
83/84/85
10/59/82
77
81
77
78
88
89
83
84
85
81
89
81
29/10/59
FIGURE 10
33/46/63
81 FIGURE 9
ITEM DESCRIPTION QTY
1 Base 1
2 Center Pivot Shaft 1
3 Angular Bearing 1 Set
4 Shaft Housing 1
5 Bearing Lock Nut 2
10 Flat Washer (Not Shown) 17
13 Linear Actuator 1
14 Actuator Bracket 1
15 Actuator Pivot Pin 1
16 Sleeve Bearing 3
17 Retaining Ring (Ext.) 2
18 Spring Lock Washer (Not Shown) 1
19 Hex. Nut 1
20 Actuator Pivot Shaft 1
21 Cam Follower Bearing 2
22 Bearing Stand 2
23 Spring Lock Washer 2
24 Hex. Nut 2
25 Bearing Guide Rail 2
26 Socket Head Cap Screw 4
27 Socket Head Cap Screw 8
29 Pan Head Screw 7
33 Socket Head Cap Screw 2
37 Socket Head Cap Screw 4
42 Roll Base 1
43 Roll 2
46 Flat Washer (Not Shown) 10
49 Socket Head Cap Screw 4
50 Bracket, Connector 1
51 Receptacle 1
53 Pan Head Screw 6
54 Spring Lock Washer (Not Shown) 6
ITEM DESCRIPTION QTY
55 Washer, Flat (Not Shown) 6
56 Cable, Clamp 1
58 Pin (Not Shown) 1
59 Spring Lock Washer (Not Shown) 15
63 Spring Lock Washer (Not Shown) 14
64 Flat Washer (Not Shown) 4
65 Spring Lock Washer (Not Shown) 4
66 Actuator Adapter Bracket 1
67 Socket Head Cap Screw 1
68 Flat Washer (Not Shown) 1
69 Spring Lock Washer (Not Shown) 1
70 Flat Washer (Not Shown) 1
71 Hex. Nut 1
72 Flat Washer (Not Shown) 4
73 Spring Lock Washer Not Shown) 4
74 Actuator Spacer (18 Inch Only) 1
75 Actuator Bracket Spacer (18 Inch Only) 1
76 Adjustment Bracket 1
77 Limit Switch Mounting Bracket 2
78 Limit Switch Stop Plate 1
79 Pan Head Screw 4
80 Nut 2
81 Limit Switch 4
82 Pan Head Screw 4
83 Pan Head Screw 8
84 Washer (Not Shown) 8
85 Spring Lock Washer (Not Shown) 8
86 Cable Clamp 2
87 Cable Clamp 1
88 Bracket, Auto-Centering 1
89 Bracket, Limit Switch 2
90 Cable (Not Shown) 2
In accordance with Nexen’s policy of product improvement, the specifications and technical data contained in this manual are subject to change without notice and are based on the latest information
available at the time of printing.