Error displays/messages, 33 error displays/messages – Sony CDX-CA850 User Manual

Page 33

Advertising
background image

33

Error displays/Messages

*1

When the CD/MD changer is connected to the unit,
the disc number of the CD or MD appears in the
display.

*2

The disc number of the disc causing the error
appears in the display.

If these solutions do not help improve the
situation, consult your nearest Sony dealer.

The “ST” indication flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Set to the monaural reception mode (page

27).

A programme broadcast in stereo is heard
in monaural.

• The unit is in monaural reception mode.

t Cancel monaural reception mode (page

27).

RDS

The Seek starts after a few seconds of
listening.

The station is non-TP or has weak signal.
t Press (AF) or (TA) repeatedly until “AF

off” or “TA off” appears.

No traffic announcements.

• Activate “TA.”
• The station does not broadcast any traffic

announcements despite being TP.
t Tune in another station.

PTY displays “--------.”

• The current station is not an RDS station.
• RDS data has not been received.
• The station does not specify the programme

type.

Error displays

(For this unit and optional CD/MD changers)

The following indications will flash for about 5
seconds, and an alarm sound will be heard.

Blank

*

1

No tracks have been recorded on an MD.*

2

t Play an MD with recorded tracks on it.

Error

*

1

• A CD is dirty or inserted upside down.*

2

t Clean or insert the CD correctly.

• A CD/MD cannot play because of some

problem.*

2

t Insert another CD/MD.

High Temp

The ambient temperature is more than 50°C.
t Wait until the temperature goes down

below 50°C.

NO Disc

No disc is inserted in the CD/MD unit.
t Insert discs in the CD/MD unit.

NO Mag

The disc magazine is not inserted in the CD/
MD unit.
t Insert the magazine in the CD/MD unit.

Not Ready

The lid of the MD unit is open or the MDs are
not inserted properly.
t Close the lid or insert the MDs properly.

Push Reset

The CD/MD unit cannot be operated because
of some problem.
t Press the RESET button on the unit.

Messages

LCL Seek +/–

The Local Seek mode is on during automatic
tuning (page 14).

NO AF

There is no alternative frequency for the
current station.

” or “

You have reached the beginning or the end of
the disc and you cannot go any further.

Advertising