Naim Audio CD555 - Manual (Page 4)

1. R-com Remote Handset
The r-com remote handset is supplied with the
naC 552 and CD555 and can be purchased as
an accessory. It offers quick and intuitive control
of the most often used functions of CD players,
preamplifiers, integrated amplifiers and tuners.
To fit batteries, remove the bottom end cover using
the tool provided and insert the batteries into the
body taking care with their orientation. replace the
end cover. remove the batteries if the r-com is to
be packed and shipped.
using r-com
R-com keys primarily provide control of the
functions most often used on CD players,
preamplifiers, integrated amplifiers and tuners.
In order to extend battery life, R-com will enter a
“sleep” mode when unused. It will “wake” when
lifted or when a button is pressed.
Note: R-com illumination will extinguish on key
presses when the batteries are running low.
R-com has three operational modes - CD Player
mode, Preamplifier/Integrated amplifier mode
and Tuner mode. Its default mode is CD player.
When awake in CD Player mode, all R-com keys
will illuminate green. To switch the R-com into
Preamplifier/Integrated amplifier mode or Tuner
mode press the
pre or tun keys respectively. The
pre or tun key will then illuminate white. To switch
R-com back into CD player mode either press the
pre or tun key again.
In default mode the R-com keys have the following
functions:
disp: Switches the CD player front panel
indicators off and on.
open: Opens the door on the CD555.
stop: Stops CD replay.
play: Begins CD replay.
prev: Selects the previous track or index point.
next: Selects the next track or index point.
vol +: Increases the preamplifier/integrated
amplifier volume.