5 installation, 1 hicap rear, 2 xp5 xs rear – Naim Audio 555 PS User Manual
Page 6: 3 flatcap xs rear, Hi-cap, xp5 xs, and flatcap xs, 1 hi-cap rear, 3 flatcap xs rear 5.2 xp5 xs rear
E4
mains input
and fuse
5.1 Hi-Cap Rear
socket 1
socket 2
socket 3
socket 4
ch2
-ve
ch1
nc
Socket 1, 2 & 3
+ve
-ve
+ve
ch1
ch2
Socket 4
5 Installation
Power supplies should be installed on an equipment rack intended for the purpose in their
final location before connecting cables or switching on. Ensure that power amplifiers are
switched off and the preamplifier volume is turned down before power supplies are switched
on. Connection diagrams will be found in the appropriate product owners manual.
Many power supplies are heavy and care should be taken when lifting or moving them. Make
sure that the surface on which they are to be placed can support their weight.
mains input
and fuse
mains input
and fuse
5.3 FlatCap XS Rear
5.2 XP5 XS Rear
power
out A
signal
out A
signal
out C
signal
out B
power
out B
power
switch
power
switch
signal
out D
ch2
ch1
nc
-ve
Signal Out
A, B, C & D
+ve
-ve
+ve
ch1
ch2
Power Out
A & B
Hi-Cap, XP5 XS, and FlatCap XS
multiple power output
Note:
The XP5 XS can be used to power the CDS3, CDX2, HDX,
DAC, NDX and ND5 XS. It cannot be used to power the CD555.