Lenco MC-141 - Manual (Page 4)

GB 2
Press VOLUME +/- to adjust volume level. Volume level is shown on the display.
FOR PRIVATE LISTENING
Plug in headphones (ø3.5 mm stereo mini-plug) to the PHONES jack.
When headphones are plugged in, the speakers are automatically disconnected.
TO ADJUST THE VOLUME
ADJUSTING THE SOUND
PRE-SET EQ
Preset EQ : FLAT, JAZZ, ROCK, CLASSIC, POP.
Press PRESET EQUALIZER button to select your preferred
sound, preset mode is shown on the display.
1. Power is on/off by pressing STANDBY button.
2. The function is changed cyclically
by pushing FUNCTION button :
CD TUNER AUX .
POWER ON/OFF AND FUNCTION CHANGE
STANDBY
VOL. +
VOL. -
PRESET EQ
The mute on/ off is changed cyclically by pressing MUTE
button.
The “mute” mark is on during mute is on.
The mute on is cancelled in case as shown below.
a. The power is off/on
b. The Volume is adjusted by the VOL +/- button.
MUTE ON/OFF
MUTE
AUX IN
Connect an external LINE OUT to AUX. IN socket at the back of the unit.
Press the FUNCTION button and select AUX mode.
( AUX IN CABLE NOT INCLUDED )
( Plug other end into
external source )
FUNCTION
AUX. IN
FUNCTION