Lenco MC-148 DAB+ - Manual (Page 16)

15
FM OPERATION
RECALLING A STATION PRESET
To select a preset, just press the required numeric button while in FM mode
to activate the station you stored.
DISPLAY MODES
Every time you press the INFO button on the remote control, the display will
cycle through the following display modes: The information is displayed on
the lower segment of the LCD display.
Audio Mode
This denotes whether the stations is in stereo or mono.
Radio text
As with DAB+, the broadcaster can include a scrolling text that displays
information about the current program. If Radio text information is not
available, then the display will show <No Radio Text>.
PTY (Program type)
This describes the “Style” or “Genre” of music that is being broadcast e.g.
“Rock” or “Classical”. If no program type has been set then <No PTY> will
be displayed.
Name (Program name)
This will display the frequency of the current station. If no program name,
<No Name>
will be displayed.
AUDIO MODE
Press STOP/MENU button repeatedly on the remote control, the display will
cycle through the display modes. When shows <Audio setting>, press
ENTER
button to select between <Stereo allowed> and <Forced mono>.
Audio Mode (Stereo/Mono)
Radio Text Name
PTY