Lenco MN-002 - Manual (Page 13)

TROUBLE SHOOTING
For your convenience, we have listed some methods to solve some common problems you may
encounter when you use the system. If the problem occurs repeatedly, contact the nearest
maintenance center.
Possible cause Solution
Power supply does
not work Power plug is not fully
inserted into the power socket Fully insert the power plug
into the power socket
Remote control
does not work
The batteries have been
used up
Replace them with new ones
The remote control is not
aimed at the remote control
sensor
Please aim the remote control
correctly; in line with the
remote sensor
Play is unavailable
No disc inserted Insert a disc
Disc incorrectly inserted
Reinsert the disc with the
picture upward
Disc is not compatible with
this device
No sound from
speakers
Audio wire is not connected
correctly Connect the audio wire
correctly
Incorrectly connected to
computer Connect the computer correctly
by referring to the illustration
Discontinuous sound
Disc is not clean
Disc scratched
Replace with a clean disc or
use a soft cloth to clean the
disc
Replace with a new one
Only use discs that are
compatible with this device
Problem
Temperature : 5 C~35 C
Installation : on a flat horizontal surface
SPECIFICATION
87.5-108MHz
USB, AUX INPUT
220-240V~50Hz
60W
CD, CD-R Disc type
Input joint
Power supply
Max power
Frequency
Operating conditions
12