Lenco Xemio-767BT - Manual (Page 2)

2
2. Charging the battery
 Make sure that the computer is turned on. Connect the player
to the computer by using the USB cable. Now the computer will
detect and install the driver automatically. Once the installation
is complete, the player will be displayed in “My Computer” or
for MAC users on the desktop.
Note: For Windows 98/98SE the driver needs to be installed first.
 Once connected to a computer the player will charge
automatically. After 2 ~ 3 hours the battery is fully charged. At
same time, the player is ready for media files upload /
download with your computer.
3. Turn ON/OFF player and use menu’s function
 Press and hold the button for 3 seconds to turn “ON” the
player, then you will see any one of the following shown Main
Menu screen “Bluetooth / Music / Movie / Record / Picture /
Setup / eBook” will appear on LCD after the Loading and
Opening screen have displayed.
 Select you desired menu function by using / , and
M button.
 Press M button to call up those submenus in different mode
functions.
 Press or pressing button for goes back to previous
submenu and main menu.
 Adjust the volume level by press or pressing the /
button.
 To turn OFF the player, press and hold the button for 3
seconds.
For hearing protection; a display warning pop-up on TFT
screen, or, a beep warning will be heard from earphone when
every time you increase the volume level and reach to the default
setting level which may exceed 85dB. Press M button to accept