Altera Cyclone III FPGA Starter Kit - Manual (Page 20)

3–6 Altera Corporation
Cyclone III FPGA Starter Kit User Guide July 2010
Flash Memory Programmer
Flash Memory Tab
To use the flash memory functions, click the Flash Memory tab
(
Figure 3–4 ).
Figure 3–4. Control Panel Flash Memory Tab
CFI Query
The common flash interface (CFI) flash memory devices conform to basic
flash commands. The most basic command is Query which switches the
device into a ROM table mode so that features of the flash device are
determined by reading values from the table.
To perform a CFI query using the host application, click CFI Query.
Notice that the memory table displays contents that correlate with the
table contents as described in the device datasheet.
To put the flash device back in user mode, press Reset on the control
panel.