Setting preset stations – Saab 2005 9-7X User Manual

Page 183

Advertising
background image

Press and hold this button until PSCN will appear on
the display and the radio will produce two beeps.
The radio will go to a preset station, play for a few
seconds, then go on to the next preset station.
Press either arrow again or one of the pushbuttons
to stop scanning presets.

The radio will only scan preset stations with a strong
signal that are in the selected band.

4

(Information): If the current station has a message,

the information symbol will appear on the display. Press
this button to see the message. The message may
display the artist, song title, call in phone numbers, etc.

If the entire message is not displayed, parts of the
message will appear every three seconds. To scroll
through the message, press and release the INFO button.
A new group of words will appear on the display after
every press of this button. Once the complete message
has been displayed, the information symbol will
disappear from the display until another new message is
received. The last message can be displayed by pressing
the INFO button. You can view the last message until a
new message is received or a different station is tuned to.

When a message is not available from a station, No Info
will appear on the display.

1-6 (Preset Pushbuttons): Press this button to play
stations that are programmed on the radio preset
pushbuttons.

The radio will only seek preset stations with a strong
signal that are in the selected band.

Setting Preset Stations

Up to 30 stations (six FM1, six FM2, and six AM,
six XM1 and six XM2 (if equipped)), can be programmed
on the six numbered pushbuttons, by performing the
following steps:

1. Turn the radio on.

2. Press BAND to select FM1, FM2, AM, or XM1

or XM2.

3. Tune in the desired station.

4. Press AUTO EQ to select the equalization.

5. Press and hold one of the six numbered

pushbuttons until you hear a beep. Whenever that
numbered pushbutton is pressed, the station
that was set will return and the equalization that
was selected will be stored for that pushbutton.

6. Repeat the steps for each pushbutton.

3-71

2005 - Saab 97X Owner Manual

Advertising