Mercedes-Benz 2013 E Class Coupe - Manual (Page 170)

DIRECT SELECT lever
Overview of transmission positions
j
Park position with parking lock
k
Reverse gear
i
Neutral
h
Drive
The DIRECT SELECT lever is on the right of the
steering column.
i The DIRECT SELECT lever always returns
to its original position. The current
transmission position
P, R, N or D appears
in the transmission position display
(
Y page 168) in the multifunction display.
Transmission position and drive
program display
!
If the transmission position display in the
multifunction display is not working, you
should pull away carefully to check whether
the desired transmission position is
engaged. Ideally, you should select
transmission position
D and drive program
E or S.
:
Transmission position display
;
Drive program display
The current transmission position and drive
program appear in the multifunction display.
i The arrows in the transmission position
display show how and into which
transmission positions you can change
using the DIRECT SELECT lever.
Engaging park position P
!
If the engine speed is too high or the
vehicle is moving, do not shift the
automatic transmission directly from
D to
R, from R to D or directly to P. The
automatic transmission could otherwise be
damaged.
j
Park position with parking lock
k
Reverse gear
i
Neutral
h
Drive
X Push the DIRECT SELECT lever in the
direction of arrow
P.
i The automatic transmission shifts into
park position P automatically:
R
if you open the driver's door while the
vehicle is stationary in transmission
position
D or R
R
if you open the door while traveling at
very low speeds in transmission position
D or R
168
Automatic transmission
Driving and parking