Dolby Laboratories STAV-3770 - Manual (Page 52)

48
VSX-D307
REMOTE CONTROL UNIT
7 [TUNER operations]
STATION –,+, BAND, FREQ. –,+, MPX, CLASS,
D.ACCESS buttons
[TV operations]
STANDBY/ON,CHANNEL –,+, TV FUNC., TV VOL. –,+,
buttons
[CD, TAPE, DVD, LD operations]
STANDBY/ON, 4, ¢ (Chapter/Track search), 2
(Play), 1 (Rewind), ¡ (Fast Forward), 8 (Pause), 7
(Stop), 3 (Play)
8 Number/Surround setting buttons
TEST TONE: When turned ON (while in DOLBY PRO
LOGIC), volume balance adjustment signals are output
in order from the speakers and can be adjusted.
REAR LEVEL –,+: Adjusts the rear level.
CENTER MODE: Switches the center mode.
CENTER LEVEL –,+: Adjusts the center level.
DELAY TIME: Use to set the delay time.
EFFECT –,+: Adjusts DSP effects.
9 MUTING button
Press to mute the volume.
0 DSP MODE button
Use to switch the DSP mode.
- MASTER VOLUME –/+ button
Use to adjust the volume.
= DIRECT button
Use to playback sound without going through the tone
and balance control circuits. DOLBY PRO LOGIC,
DOLBY VIRTUAL, DSP MODE and LOUDNESS also
turn off.
~ LOUD.(LOUDNESS) button
When LOUDNESS is turned ON at a small volume, the
low frequency and high frequency levels increase, ena-
bling the sound to be easier to hear.
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
DIRECT FUNC.
VIRTUAL
RECEIVER
STANDBY/ON
TV
CONTROL
LD
DVD
TUNER MPX
STANDBY/ON
CLASS D.ACCESS
TAPE
TV FUNC.
BAND
CD
SOURCE
SELECT
LOUD.
PRO LOGIC
SURROUND
DSP MODE
TV VOL.
FREQ.
0
7 8 9
4 5 6
1 2 3
MUTING
MASTER
VOLUME
CENTER
LEVEL
CD DISC
EFFECT
CENTER
MODE
DELAY
TIME
TEST
TONE
REAR
LEVEL
CHANNEL
STATION
3 3
CD TUNER
3
DVD/LD
2
VCR/TAPE 1 PHONO
2
2 SURROUND button
Press to start the SURROUND function.
3 PRO LOGIC button
Use to turn ON/OFF DOLBY PRO LOGIC.
4 VIRTUAL button
Use to change the mode of DOLBY VIRTUAL.
5 RECEIVER STANDBY/ON button
6 FUNC. (FUNCTION) button
Use to switch the function setting of this unit.
1 SOURCE SELECT function buttons
When operating other devices, press any one of these
buttons to specify the device to be operated.
memo
This button cannot be used to switch the functions of this
unit.