Subaru 2013 Impreza - Manual (Page 318)

Black plate (328,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
7-36
Starting and operating
place the ignition switch in the “LOCK”
position once and then start over
again.
! To deactivate
1. Park your vehicle in a flat and safe
location and apply the parking brake.
2. Turn the ignition switch to the
“LOCK”
position.
3. Restart the engine.
4. Confirm the following items.
. The ABS warning light “ / ”
turns off.
. The Vehicle Dynamics Control
warning light
“ ” turns off.
. The Vehicle Dynamics Control OFF
indicator light
“ ” turns off.
. The Brake system warning light
“ / ” illuminates.
Vehicle Dynamics Control OFF switch
5. Press the Vehicle Dynamics Control
OFF switch and hold it until the Vehicle
Dynamics Control OFF indicator light
“ ”
on the combination meter illuminates for
several seconds and then turns off.
6. Within 5 seconds after the Vehicle
Dynamics Control OFF indicator light
turns off, release the Vehicle Dynamics
Control OFF switch.
Hill start assist OFF indicator light
7. Within 2 seconds after releasing the
Vehicle Dynamics Control OFF switch,
press the Vehicle Dynamics Control OFF
switch once again. Then the Hill start
assist OFF indicator light illuminates.
8. Turn the ignition switch to the
“LOCK”
position. The hill start assist system has
now been deactivated.
NOTE
While the Hill start assist system is
deactivated, the Hill start assist OFF
indicator light illuminates continuously.
! To activate
When the procedure to deactivate the Hill
start assist system is performed again, the