Dynex DX-24L200A12 - Manual (Page 17)

Making connections
13
DX-24L200A12
Using composite video (good)
To connect a DVD or Blu-ray player using composite
video:
1 Make sure that your TV’s power cord is unplugged
and the composite video device is turned off.
2 Connect a composite cable (provided) to the VIDEO
and L and R audio jacks on the back of your TV and
to the AV OUT jacks on the composite video device.
To play from the composite video device:
1 Turn on your TV, then press INPUT to open the
INPUT SOURCE list.
2 Press or to select AV, then press ENTER.
3 Turn on the DVD or Blu-ray player.
Connecting a VCR
To connect a VCR:
1 Make sure that your TV’s power cord is unplugged
and the VCR is turned off.
2 Connect a composite cable (provided) to the VIDEO
and L and R audio jacks on the side of your TV and to
the AV OUT jacks on the VCR.
To play from the VCR:
1 Turn on your TV, then press INPUT to open the
INPUT SOURCE list.
2 Press or to select AV, then press ENTER.
3 Turn on the VCR.
Note
When you connect the audio using the L and R audio
jacks, the audio output is analog.
Note
You can also press VIDEO to select the composite
device.
Y P B P R L - AUDIO - R
COMPONENT IN
ANT / CABLE
AV IN
VIDEO HDMI 2 HDMI 1 / DVI VGA PC / DVI
AUDIO IN DIGITAL
OUTPUT SERVICE PORT
Back of TV
DVD or Blu-ray player
Cables are often color-coded to match color-coded jacks.
Connect yellow to yellow, red to red, and white to white.
Composite cable
Note
When you connect the audio using the L and R audio
jacks, the audio output is analog.
Note
You can also press VIDEO to select the VCR.
Y P B P R L - AUDIO - R
COMPONENT IN
ANT / CABLE
AV IN
VIDEO HDMI 2 HDMI 1 / DVI VGA PC / DVI
AUDIO IN DIGITAL
OUTPUT SERVICE PORT
Back of TV
VCR
Cables are often color-coded to match color-coded jacks.
Connect yellow to yellow, red to red, and white to white.
Composite cable
DX-24L200A12_11-0584_MAN_ENG_V1.book Page 13 Wednesday, September 14, 2011 12:59 PM