Subaru 2011 Impreza WRX - Manual (Page 147)

Black plate (149,1)
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
turn it again to the “ON” position.
. If this indicator light and the CHECK
ENGINE warning light/malfunction in-
dicator lamp flash simultaneously dur-
ing driving, have the vehicle checked
by your nearest SUBARU dealer.
&
Cruise control set in-
dicator light
This light illuminates when vehicle speed
has been set.
&
Front fog light indicator
light (if equipped)
This indicator light illuminates while the
front fog lights are illuminated.
&
Headlight indicator
light (if equipped)
This indicator light illuminates when the
headlight switch is placed in the
“ ” or
“ ” position.
& Driver’s control center differ-
ential auto indicator light
(STI)
This light functions while the ignition
switch is
“ON”. When illuminated, it
indicates that the driver ’s control center
differential is set to the auto mode. It turns
off when the driver
’s control center differ-
ential is set to the manual mode. For
details, refer to
“Driver’s Control Center
Differential (DCCD) (STI) ” F7-18.
! Driver’s control center dif-
ferential auto [+] indicator
light
When the AUTO [+] mode is set, the
AUTO [+] indicator light illuminates.
For details, refer to
“Driver’s Control
Center Differential (DCCD) (STI) ” F7-18.
! Driver’s control center dif-
ferential auto [ −] indicator
light
When the AUTO [ −] mode is set, the
AUTO [ −] indicator light illuminates.
For details, refer to “Driver’s Control
Center Differential (DCCD) (STI) ” F7-18.
& Driver’s control center differ-
ential indicator and warning
lights (STI)
! Indicator lights
When you select the manual mode of the
driver
’s control center differential, the
initial limited slip differential (LSD) torque
that is currently selected for the center
differential is indicated by the illumination
of these indicator lights.
Instruments and controls
3-27
– CONTINUED –
3