Subaru 2010 Forester User Manual

Page 128

Advertising
background image

Black plate (117,1)

北米Model "A8150BE-B" EDITED: 2009/ 10/ 2

contains an immobilizer transponder.

. The key is near or touching another
transmitter.

& Key reminder chime

The reminder chime sounds when the
driver

’s door opens and the key is in the

“LOCK” or “Acc” position. The chime stops
when the ignition switch is turned to the

“ON” position or the key is removed from
the ignition switch.

& Ignition switch light

For easy access to the ignition switch in
the dark, the ignition switch light illumi-
nates when the driver

’s door is opened or

when the driver

’s door is unlocked using

the remote keyless entry transmitter. The
light remains on for several seconds and
then gradually turns off after driver

’s door

is closed. Also, the light turns off immedi-
ately if the key is turned to the

“ON”

position or if all doors and the rear gate
are locked using the remote keyless entry
transmitter.

Hazard warning flasher

The hazard warning flasher is used to
warn other drivers when you have to park
your vehicle under emergency conditions.
The hazard warning flasher works regard-
less of the position of the ignition switch.

To turn on the hazard warning flasher,
push the hazard warning button on the
instrument panel. To turn off the flasher,
push the button again.

NOTE

When the hazard warning flasher is on,
the turn signals do not work.

Meters and gauges

NOTE

Liquid-crystal displays are used in
some of the meters and gauges on
the combination meter. You will find
their indications hard to see if you wear
polarized glasses.

& Combination meter illumina-

tion

When the ignition switch is turned to the

“ON” position, the various parts of the
combination meter are illuminated in the
following sequence:
1. Warning lights, indicator lights, meter
needles, gauge needles, odometer and
trip meter back light illuminate.
2. Meter needles and gauge needles
each show MAX position.
3. Meter needles and gauge needles
each show MIN position.
4. Dials and indicators in meters and
gauges light up.
5. Regular illumination (for driving) be-
gins.

Instruments and controls

3-5

– CONTINUED –

3

Advertising
This manual is related to the following products: