Subaru 2006 Baja - Manual (Page 418)

11-53
Maintenance and service
– CONTINUED –
Aluminum wheels
Aluminum wheels
Aluminum wheels can be scratched and damaged
easily. Handle them carefully to maintain their appear-
ance, performance, and safety.
y When any of the wheels is removed and replaced
for tire rotation or to change a flat, always check the
tightness of the wheel nuts after driving approximately
600 miles (1,000 km). If any nut is loose, tighten it to
the specified torque.
y
Never apply oil to the threaded parts, wheel nuts, or
tapered surface of the wheel.
y
Never let the wheel rub against sharp protrusions or
curbs.
y
Be sure to fit tire chains on uniformly and completely
around the tire, otherwise the chains may scratch the
wheel.
y
When wheel nuts, balance weights, or the center
cap is replaced, be sure to replace them with genuine
SUBARU parts designed for aluminum wheels.
Windshield washer fluid
Windshield Washer fluid
Never use engine coolant as washer fluid be-
cause it could cause paint damage.
Check the level of the washer fluid at each fuel stop. If
the level is low, fill the fluid up to the neck of the reser-
voir.
Use windshield washer fluid. If windshield washer fluid
is unavailable use clean water.
In areas where water freezes in winter, use an anti-
UBB004IA