NISSAN 2008 Sentra User Manual

Page 30

Advertising
background image

Fastening the seat belts

1. Adjust the seat. See “Seats” earlier in this

section.

2

Slowly pull the seat belt out of the retractor

and insert the tongue into the buckle until

you hear and feel the latch engage.

The retractor is designed to lock during

a sudden stop or on impact. A slow

pulling motion permits the seat belt to

move, and allows you some freedom of

movement in the seat.

If the seat belt cannot be pulled from

its fully retracted position, firmly pull

the belt and release it. Then smoothly

pull the belt out of the retractor.

3

Position the lap belt portion low and snug

on the hips as shown.

4

Pull the shoulder belt portion toward the

retractor to take up extra slack. Be sure the

shoulder belt is routed over your shoulder

and across your chest.

The front passenger seat and the rear seating

positions three-point seat belts have two modes

of operation:

● Emergency Locking Retractor (ELR)
● Automatic Locking Retractor (ALR)

Manual front seat shown

WRS0719

WRS0137

WRS0138

1-14

Safety—Seats, seat belts and supplemental restraint system

REVIEW COPY—

2008 Sentra (sen)

Owners Manual—USA_English (nna)
01/22/08—debbie

Advertising