Optoma GB-200 User Manual
Optoma Projectors
Optoma GB-1000 / GB-200 / GB-200 Auto Blending System Quick Start Guide
Caution before setup.
The software is compatible with Windows 7 & Windows 8.
Need a specific camera & a 4-port network hub are required for GB-1000 / GB-200 operation. Those two items are NOT included in GB-1000 /
GB-200 package. Camera support list:
Webcam: Logitech
®
HD Webcam C920
DSLR: Canon EOS 40D/60D/650D/500D (Available in 2014 Q1/M)
*Tripod & USB extended cable may be required for camera setup
1. Connecting GB-1000 / GB-200 to Control PC
Setting IP address of GB-1000 / GB-200 box & Control PC.
Setting IP address from Control PC.
i.
Open Network Connections by clicking the Start button
, and then clicking Control Panel. In the search box, type adapter, and then, under Network and Sharing Center,
click View network connections.
ii.
Right-click the “Internet Protocol(TCP/IPv4)” then click Properties
.
iii.
Select “Use the following IP address” and then set PC’s IP address to same network group of GB-1000 / GB-200 box. E.g.192.168.0.XXX (XXX=10~250)
iv.
Click “OK” button to apply the setting