Optoma OCM818B - Manual (Page 6)

6
User Operation Guide
Centre of Flush
Mount
Centre of Gravity
This surface to be ap-
proximate parallel to
the projector front
3mm Allen key
Extension Bracket
100mm
M5x10mm
Socket Button
Cap Screw
C.1— Loosen the M5x10mm Socket Button Cap Screws using the 3mm Allen key until you can slide the
extension brackets freely, as shown.
C.2— Place projector’s Flush Mount Assembly over the projector and align the centre of the Flush
Mount with the projector’s approximate Centre of Gravity.
(C) Attaching the Flush Mount Assembly to the projector: