DigiTech RP80 - Manual (Page 7)

1. Footswitches - These 2 Footswitches are used to select presets, access the Tuner, or bypass
the RP80. The Up Footswitch increments, and the Down Footswitch decrements
through the presets. Pressing both Footswitches simultaneously bypasses the
selected preset. Pressing and holding both Footswitches accesses the Tuner.
2.Value/Volume Buttons - The Value Buttons perform various value adjustment functions for
the RP80. These buttons are used to control the RP80’s Master Level, adjust a
selected effect, and also change the Pattern,Tempo, and Level of the Drum machine
when it is turned on. When the Tuner is enabled, these buttons select the tuning
reference.
3. Effect/Edit Buttons - Pressing either Edit buttons enters Edit mode and selects the
individual effects to be edited. Press the left and right Edit buttons to move through
the effects. Each effect LED will light to indicate which effect you are editing
4. Drums - The Drums button is used to turn on and off the RP80’s drum machine. When the
Drums feature is active, the Drums LED lights and the selected drum pattern plays
continuously.
5. Effect LEDs - The Effect LEDs provide information regarding the current preset. In Edit
mode, the LEDs indicate the effect selected for editing. In Tuner mode, the LEDs
indicate whether the note played is sharp, flat, or in tune.
3