D-Link DI-308 - Manual (Page 37)

DI-308 ISDN Remote Router
29
The parameters are described below:
•
SNMP Community String – This community string is a user-defined identifying
name used to group together some arbitrary set of SNMP application entities
managed by the network manager.
•
Access Right – This element of the set {Read Only, Read/Write} is called the
SNMP access mode. If the SNMP Community String has an Access Right of
Read/Write, then that Community String is available as an operand for the get,
set, and get next operations. Otherwise, if the Community String’s corresponding
Access Right is Read Only, then it is available as an operand for the get and get
next operations only.
•
Status – This validates or invalidates the use SNMP Community String, by
setting the string to Valid or Invalid. Note that setting the use of the string to
Invalid is the same as removing the string, however, the string remains so as to be
validated at an appropriate time.
SNMP Trap Manager
From the SNMP Agent Configuration menu, select and enter the SNMP Trap
Manager submenu. You will see the following configuration screen: