ABtUS AV383W6-V1 User Manual
Page 11
*Specifi cations are subject to changes without notice.
INSTALLATION GUIDE
2. Placing and Fixing the Plasma Unit
NOTE: Do consult a qualifi ed and authorized service technician if you encounter any technical
difficulties. We are not liable for any damage or injuries arising from any improper installation or
mishandling.
Now, enjoy your Plasma display unit !!
Lift the display unit to the Cross Bar of
the wallplate, and the lower the unit into
place until the Hooks are fully seated in the
grrove of the “U” plate assembly
To prevent power cord and signal cables
from entangling when placing the unit, use
cable ties to secure them behind the unit.
Check the viewing angle.
Please refer to the documentation that
comes with the plasma unit, to ensure that
the correct size of the screw is used.
Ensure correct size of Screw