Alto Professional Stealth Wireless Expander Pack - Manual (Page 7)

7
Dual Channel Setup
To send stereo signals through the Stealth Wireless transmitter to 4 receivers:
1. Connect your mixer’s main outputs to the input channels on the Stealth Wireless transmitter, and
connect the Stealth Wireless receivers’ outputs to your loudspeaker’s inputs.
2. Connect your Stealth Wireless Expander Pack receivers outputs to your loudspeakers inputs.
Keep all
mixer volume and transmitter Trim controls at a minimum.
3. Power on the Stealth Wireless transmitter and receivers. Set their channels to matching numbers.
4. Adjust the transmitter and receivers antennas to a vertical position.
5. Set the transmitter to “stereo” and adjust the Trim controls to get a strong signal without clipping.
6. Turn on your loudspeaker, adjust the output level of your mixer, and adjust the Trim controls on
the transmitter to hear the audio signal. If
you hear noise in the signal , change to a different
channel until a clean signal comes through.
Transmitter
Powered
Speaker
Powered
Speaker
Mixer
This diagram shows the
signal flow from a mixer,
through Stealth Wireless,
to speakers.
Stealth
Wireless
Receivers
Stealth Wireless
Expander
Pack Receivers