Alto Professional Radius 200 - Manual (Page 57)

57
Appendix (English)
Technical Specifications
Hand-held condenser vocal microphone transmitter included with Radius 200.
Headset microphone and wireless belt-pack transmitter included with Radius 200H.
Lavalier/lapel microphone and wireless belt-pack transmitter included with Radius 200L.
1/4” (6.35mm) instrument adapter cable and wireless belt-pack transmitter included with Radius 200M.
Specifications are subject to change without notice.
Receiver
UHF Band Operation 520–937.5 MHz (region-specific)
Oscillator PLL Synthesized
Frequency Stability ±0.005%
Modulation FM
Transmission Range 328 feet / 100 meters
Signal-to-Noise Ratio > 100 dB (at 20 KHz deviation and 60 dBμV antenna input
Image & Spurious Rejection 80 dB minimum
Receiving Sensitivity At 2 uV over 52 dB/A SNR
Selectivity > 50 dB
AF Response 80 Hz – 18 KHz
THD < 1% (at 1 KHz)
IF Frequency 1st: 243.95 MHz / 2nd: 10.7 MHz
Dynamic Range > 100 dB
Tone Signal 32.768 KHz
Audio Output 1 balanced XLR
1 unbalanced 1/4” (6.35mm)
Display High-visibility back-lit LCD with RF and AF meters
Power Supply: 12 V, 1 A, center positive (adapter included)
Consumption: 520 mA ±10 mA
Case Half 19” EIA-rack metal case
Dimensions
(width x depth x height)
7.9” x 7.2” x 1.7”
20.0 cm x 18.3 cm x 4.2 cm
Weight
2.1 lbs.
1.0 kg