SoundMax SM-CMD3001 - Manual (Page 15)

15
Inserting the USB device
Insert the USB device into USB jack. Press SOURCE button on the RC to go into USB mode. The first USB
device track playback will start.
Note: USB functions (flash memory type) MP3 music play
FAT 12/FAT 16/FAT 32 is possible
-
FAT 12/16 (dir: 200 support, file: 500 support),
-
FAT 32 (dir: 200 support, file: 500 support).
Filename: 32 byte/ Dir name: 32byte.
Tag (id3tag, English)
-
Title/Artist/Album: 32 byte support.
USB format supports 2.0.
Capacity: up to 2 GB.
SD/MMC mode
Remove the front panel. Insert the card into the SD slot. Press SOURCE button to choose SD mode.
SD cards brands: Canon, Fuji film, Palm, Motorola, Microsoft, IBM, HP, Compaq, Sharp, Samsung, etc.
Capacity: up to 2 GB.
MMC cards brands: Ericsson, Nokia, Motorola, HP, Palm, Sanyo, Microsystems, etc.
Capacity: up to 2 GB.
Loading/eject a disc
-
Press OPEN button on the front panel to discover the inner panel. Insert the disc with the printed side
facing upward into the slot, it will start playing automatically. Close the front panel.
-
To stop the playback press STOP on the RC.
-
Open the front panel. Press EJECT button to eject the disc.
Playing/pausing playback
-
When the disc is in the playback will start automatically. Or you can press PLAY/PAUSE on the RC or
APS/PLAY/PAUSE button to start playback.
-
To ensure good system performance, wait until the unit finishes reading the disc information before
proceeding.
-
Press PLAY/PAUSE button to pause the playback. Press again to resume the playback.