DirecTV HDTV - Manual (Page 79)

Getting Assistance
76
RUNNING THE INTERACTIVE SETUP
You should have completed the interactive setup the first time you plugged in your
TV. However, if you need to access the interactive setup again, you can access it
through the Assistance menu.
1. Press MENU on the remote control to access the main menu.
2. Select Assistance from the main menu.
3. Select Interactive Setup and follow the on-screen directions.
The interactive setup process allows you to complete all steps or selectively skip
steps.
The steps involved in the interactive setup include:
• Setting the time and date
• Searching for channels
• Setting up speakers
• Selecting an audio processor
• Specifying your satellite dish antenna type
• Running the system test
Note that if you do not subscribe to DIRECTV ® programming, you can select “Skip
this step” for specifying satellite dish antenna type and running the system test.
GETTING ANTENNA INFORMATION
The Antenna Info menu helps you measure the strength of all available TV
channels. It will help you adjust any terrestrial TV antennas. (The actual adding of
channels is done by using the Channel Search menu.)
To access the Antenna Info menu:
1. Press MENU to bring up the main menu.
2. Select Assistance.
3. Then select Antenna Info.
A dialog box reports the status of the signal search and lists channels that are being
received or have been received from all terrestrial antennas. To switch between
antennas, highlight and channel and then press ANTENNA on the remote control.