Atlona Lc2 - Manual (Page 6)

A/V Station Connection
HDTV & Projector to AVR
• An additional (not included) HDMI cable is needed when connecting
to an AVR. Connect the LinkCastAV into the AVR then the AVR into
an HDTV, Monitor, or Projector.
• If an AVR is not being used, connect the LinkCastAV directly into the
HDMI port of the HDTV, Monitor, or Projector.
• At this time, the 1st transmitter and LinkCastAV should be synced and
ready to use. If not, please see Remote instructions further in the manual.


 
Atlona
LinkConnect Flat HDMI Cable
AT-LCT-4 (NOT INCLUDED)
For additional HDMI cables we
recommend the Atlona LinkConnect
collection of Flat and Thin High-Speed
HDMI Cables with Ethernet. Available at
atlona.com