Atlona AT UHD EX 70 - Manual (Page 5)

5
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
HDBaseT IN HDMI OUT
FW LINK
POWER
AT-UHD-EX-70-RX
HDBaseT IN HDMI OUT
FW LINK
POWER
AT-UHD-EX-70-RX
- +
HDBaseT OUT HDMI IN
FW
DC 48V
LINK
POWER
AT-UHD-EX-70-TX
- +
HDBaseT OUT HDMI IN
FW
DC 48V
LINK
POWER
AT-UHD-EX-70-TX
Panel Description
Transmitter
Receiver
1. Firmware Update Port: Use a Mini-B USB to USB A cable to connect to a Windows computer for
updating.
2. Yellow Link LED: Signal Indicator for the HDBaseT OUT port
Solid - Good signal from the HDBaseT port
Blinking - HDBaseT port is disconnected or not transmitting signals
No Light - No signal is being received from the HDBaseT port
Green Power LED: Power indicator. If plugged in light will remain solid. If LED starts blinking
power is intermittent or there is a problem with the cable. If the LED is off, no power is passing
from the wall outlet to the transmitter
(check your outlet or the power cable) .
3. Power Port: Connect included power adapter here
4. HDBaseT OUT Port: Connect a category cable from here to an AT-UHD-EX-70-RX
(included)
5. HDMI IN Port: Connect HDMI or DVI (with adapter) source here
Ex. Blu-ray player, cable box, HDDA, H2H series, etc
1. Firmware Update Port: Use a Mini-B USB to USB A cable to connect to a Windows computer for
updating.
2. Yellow Link LED: Signal Indicator for the HDBaseT IN port
Solid - Good signal from the HDBaseT ports
Blinking - HDBaseT port is disconnected or not receiving signals
No Light - No signal is being received from the HDBaseT port
Green Power LED: Power indicator. If plugged in light will remain solid. If the LED starts blinking
power is intermittent or there is a problem with the cable. If the LED is off, no power is passing
from the wall outlet to the receiver
(check your outlet or the power cable) .
3. HDBaseT IN Port: Connect a category cable from here to an AT-UHD-EX-70-TX (included)
4. HDMI OUT Port: Connect HDMI or DVI (with adapter) display here
4
4
2 5 3
2 3
1
1