Atlona AT PROHD82M User Manual
Page 5
www.atlona.com | toll free:
1-877-536-3976
For International: 1-
408-962-0515
5
PANEL DESCRIPTIONS
1) Power selector allows user to switch power ON or OFF
3) Change inputs for the output # 1. Cycle through HDMI 1, HDMI 2, CVSV1, CVSV2, COMP1, COMP2, VGA1, VGA2
7)
Change inputs for the output # 2. Cycle through HDMI 1, HDMI 2, CVSV1, CVSV2, COMP1, COMP2, VGA1, VGA2
4)
Select “Left” or “Right” key to switch between adjustments for each output.
When switching, you will see this “I” character next to either output # 1 or output #2.
5)
Once the “I” character is placed next to the output you want to adjust,
you can press “UP” or “Down” key to select resolutions. Select “Enter” to confirm the output resolution.
6)
Once the “I” character is placed next to the output you want to adjust,
you can press Volume Up/Down keys to select the volume level for the specific output.
2) Hold the “Enter” key for 5 seconds to activate OSD.
1. Front Panel
2. Rear Panel
1
2
3
4
5
10 11
12
16
14
13
6
7
9
15
8