Atlona AT HD V44M V3 - Manual (Page 4)

4
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
1 2 3 4 5 6
1 2 3 4 5
Remote Control
1
2
3
4
5
Panel Description
Front Panel
1. Power Switch: LED will illuminate blue when on. Press switch to turn switcher on and off.
2. LED Status Lights: LEDs will illuminate when a device is connected to the corresponding input.
3. Output Status Display: Will display the current input going to the corresponding Output.
4. Output Selection Button: Select which outputs you will be using with your input selection
5. IR Sensor: Picks up IR signals from the included IR remote control.
6. Input Selection Button: Press to select the input of the previously chosen Outputs.
Back Panel
1. HDMI Output ports: Connect HDMI or DVI (with adaptor) displays to these ports
2. HDMI Input ports: Connect HDMI or DVI (with adaptor) sources to these ports
3. RS-232 Port: Connect 9pin RS-232 cable from this port to a 9pin RS-232 port on a computer
4. 3.5mm IR Extender port: Connect IR extender cable to this port
5. 12V DC port: Connect included 12V DC adaptor here
1. Power On and Off
2. Output 1 - Press 1 through 4 to select the corresponding input
3. Output 2 - Select 1 through 4 to choose the input
4. Output 3 - Choose button 1 through 4 to select the input
5. Output 4 - Press 1 through 4 to select an input