Atlona AT HD V14SS V2 - Manual (Page 4)

4
1. POWER LED will light up when power is on.
2. SIGNAL LED will light up when an HDMI source signal is detected.
3. 2D/3D selection: Move the switch to select between 2D or 3D source content
4. 2-CH/Multi-CH Bitstream: Move the switch to select between stereo audio or surround sound
multi-channel audio source content
5. 1080i&720p/1080p: Move the switch to select between HD 1080i & 720p or 1080p
6. EDID Learning/Default EDID:
Move the switch to Default EDID to manually adjust the resolution and audio.
Move the switch to EDID Learning to learn the EDID from the device connected to the HDMI output
The Signal LED will blink while learning then stop when completed. Leave the switch on EDID
Learning in order to keep the Display’s EDID). Returning the switch to Default EDID will erase the
learned EDID.
1. 5V DC: Connect the included 5V DC power supply unit here
2. HDMI INPUT: Port for the HDMI source device
3. HDMI OUTPUT: Connect to an HDMI display or to AT-HD19SS, AT-HD50SS or AT-HD-V14SS
for cascading
4. CAT5/6/7 OUTPUT: Out port for CAT5e/6/7 cable to be used with receiver units AT-HDRS or
AT-HD15SRS
1
1
2
2
6
5
4
4
3
3
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Panel Description
Front Panel
Back Panel