Panel description, Transmitter receiver, For ir products only – Atlona AT HD Extenders User Manual

Page 4

Advertising
background image

4

CAT5e/6/7 OUT

DC 24V

- +

AT-HDTX-IR

FIRMWARE

LINK

POWER

IR IN

HDMI IN

PWR IR

IR OUT

- +

CAT5e/6/7 IN

AT-HDRX-IR

FIRMWARE

LINK

POWER

IR IN

HDMI OUT

PWR IR

IR OUT

- +

CAT5e/6/7 OUT

DC 24V

- +

AT-HDTX-IR

FIRMWARE

LINK

POWER

IR IN

HDMI IN

PWR IR

IR OUT

- +

CAT5e/6/7 IN

AT-HDRX-IR

FIRMWARE

LINK

POWER

IR IN

HDMI OUT

PWR IR

IR OUT

- +

atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Panel Description

Transmitter

Receiver

1. Firmware Update Port: Use a Mini USB to USB A cable to connect to a Windows computer for
updating.
2. IR IN Port: Connect an IR receiver or IR control box to this port.*
3. IR OUT Port: Connect the IR Emitter or IR control box to this port.*
4. HDMI IN Port: Connect HDMI or DVI (with adapter) source here.
5. Yellow Link LED: Signal Indicator for the CAT5e/6/7 OUT port. LED will remain solid, unless there
is an issue with the cable or signal, then it will blink.
Green Power LED: Power indicator. If plugged in light will remain solid. If LED starts blinking
power is intermittent or there is a problem with the cable. If LED is off, no power is passing to
the receiver (check your outlet or the power cable).
6. Power Port: Connect included captive screw power adapter here.
7. CAT5e/6/7 OUT Port: Connect a category cable from here to a compatible receiver.

1. Firmware Update Port: Use a Mini USB to USB cable to connect to a Windows computer for
updating.
2. IR IN Port: Connect the IR receiver to this port.*
3. IR OUT Port: Connect the IR Emitter to this port.*
4. HDMI OUT Port: Connect to HDMI or DVI (with adapter) display.
5. Yellow Link LED: Signal Indicator for the CAT5e/6/7 OUT port. LED will remain solid, unless there
is an issue with the cable or signal, then it will blink.
Green Power LED: Power indicator. If plugged in light will remain solid. If LED starts blinking
power is intermittent or there is a problem with the cable. If LED is off, no power is passing to
the receiver (check your outlet or the power cable).
6. CAT5e/6/7 IN Port: Connect a category cable from a compatible transmitter to this port.

6

7

6

4

4

5

5

2

2

1

1

3

3

*For IR products only

Advertising
This manual is related to the following products: