Atlona AT DVI MATRIX - Manual (Page 8)

Atlona Technologies www.atlona.com 8
The unbalanced connection transmits signals only with one cable. Without counteraction,
it can be interfered more easily. Accordingly, it is adopted for household appliance or some
cases with low technical demand. Take the audio signal line for example: 1.Unbalanced: pin
“G” connect to SLEEVE, pin “+” connect to TIP, pin “–” connect to pin “G”; 2.Balanced:
pin “G” connect to SLEEVE, pin “–” connect to RING, pin “+” Connect to TIP.
To select which connection is up to the interface of the device. When available, the balanced
Connection is the first choice.
Before connecting, please read the command or relevant demand in the user manual care-
fully. In some cases, there is balanced in source signal end but unbalanced in the destination
end. If in a nonstandard case, it is done to connect balanced for the balanced end and unbal-
anced for unbalanced end. But if in a standard one, the converter must be used to switch the
signals as the same, balanced or unbalanced.
Example of connection