Atlona AT CV42M User Manual

Page 5

Advertising

www.atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

1. DC power plug-park input connector. Ensure that the plug-park used is an approved type and has sufficient
current carrying capacity with the correct voltage and connector polarity. 12Volt DC power supply 0.66A Max.

Power Jack:

DC Jack - inner OD O 2.1mm (+ )

Outside OD O 5.5mm (GND)

Power input - 12VDC, 0.66A

2. INPUTS: 1-4 Component/Stereo Audio. Connect desired source of Component Video(YPBPR)/Stereo Audio
devise to the switcher.

Inputs 1-4 port source signals :

Component Video(YPBPR),

3x RCA Connectors,

Stereo Audio(AR/AL),

2x RCA Connectors

Component Video (YPBPR) Via 3x RCAs

Stereo Audio(AR/AL) Via 2x RCA connectors

Note: With 6x RCA female connectors.

3. OUTPUTS 1- 2 Component/Stereo Audio. Connect desired signal with Component Video(YPBPR)/audio
direct to Female RCA connector. This connector supports component video & audio to HDTV display device.

Outputs 1- 24 display port signals :