Atlona AT COMP500 - Manual (Page 4)

3 www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
1. Front Panel
2. Rear Panel
1. HD input: Connect the YPbPr input connecter to the source, such as a DVD Player or Set-top-box.
Note: When input source is not displaying full screen (i.e. letter box/pillbox image) then the output display
may come out with incorrect size or positioning of images. Input source must be set to full screen first
before powering on the converter.
2. Power indicator: The power LED will illuminate with Green when the power is on. When the LED is illumi-
nated with Red, the system is in standby mode.
3. Power: Plug the 5V DC power supply into the unit and connect the adaptor to an AC wall outlet.
1. Underscan/Overscan: Switch the switcher to select underscan/overscan for the pictures.
2. PAL/NTSC: Switch the switcher to select PAL/NTSC output.
3. Composite video output: Connect to video output display.
4. S-Video output: Connect to S-Video output display.
5. HD Bypass: The YPbPr output connecter will bypass the HD signal.
PANEL DESCRIPTIONS