Atlona AT COMP 42M - Manual (Page 8)

7, Feedback commands (from a controller)
The 8 ASCII feedback commands are send after receiving the command from a controller
Item Command Function Description
1 6%$/21$. Power on Responses the system power.
On command to the controller
2 6%$/2)$. Power off Responses the system power.
Off command to the controller
3 6%8'[[ Channel 1 updated Changes the 1 st output signal.
xx is the selected source
[[    
4 6%8'[[ Channel 2 updated Changes the 2 st output signal.
xx is the selected source
[[    
5 6%8'[[ Channel 3 updated Changes the 3 st output signal.
xx is the selected source
[[    
6 6%8'[[ Channel 4 updated Changes the 4 st output signal.
xx is the selected source
[[    
7 6%6<6/2. Lock on Is locked on
8 6%6<68/. Lock off Is released
9 6%567$&. Reset Responses the reset command.
10 6%67$7$. Status asknowledge Responses the ask status
Command to the controller
Remark: The device responds to one feedback command for every request except the
<SBASKATA> . After the device receives <SBASKATA>, it will send the 10
th
, 1/2
th
, IN/OUT
state, 7/8
th
command sequentially.
Note: Responses IN/OUT state command: SBUD0000XXYY
input port XX=> (01, 02, ..., 06)
output port YY=> (01, 02, ..., 06)
6