Canon PIXMA iP2600 - Manual (Page 17)

13 Before Using the Printer
„ Loading Envelopes
Use either European DL or US Comm. Env. #10-sized envelope.
With proper printer driver settings, the address will be printed according to the direction of
envelope.
1
Prepare the envelopes.
z Press down on all four corners and edges of the envelopes to flatten them.
z If the envelopes are curled, hold the opposite corners and gently twist them in the opposite
direction.
z If the corner of the envelope flap is folded, flatten it.
z If the leading edge of an envelope is puffed up or curled, use a pen to press the envelope
flat and sharpen the crease.
Press the envelope flat, working from the middle to the edge.
* The above illustrations show a side view of the leading edge of the envelope.
Important
Do not use the following envelopes:
z
Envelopes with a double flap (or sticker flaps)
z Envelopes with an embossed or treated surface
z Envelopes with pressure seals
z Envelopes whose gummed flaps are already moistened and adhesive
Important
z The envelopes may jam in the printer if they are not flat or the edges are not aligned.
z Make sure that no curl or puff exceeds 0.1 inches / 3 mm.