Atlona AT HDTX - Manual (Page 4)

4
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Panel Description
Front Panel
1. Firmware Update Port: Use Mini USB to USB cable to connect to a Windows computer to update.
2. HDMI IN Port: Connect HDMI or DVI (with adapter) source here.
3. Yellow Link LED: Signal Indicator for the CAT5e/6/7 OUT port. LED will remain solid, unless there
is an issue with the cable or signal, then it will blink.
4. Green Power LED: Power indicator. If plugged in light will remain solid. If LED starts blinking
power is intermittent or there is a problem with the cable. If LED is off, no power is passing to
the receiver (check your outlet or the power cable).
1 3
4
2
Back Panel
1. Power Port: Connect included captive screw connector and power adapter here.
2. CAT5e/6/7 OUT Port: Connect CAT5e/6/7 cable from here to a compatible receiver.
Ex. AT-HDRX (recommended)
1 2