Atlona AT AVS100 V3 - Manual (Page 4)

atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
1. S-Video input (SV): Connect the source with S-Video interface here.
2. Composite (CV) input: Connect the source with composite video input here.
3. DC 5V In: Connect 5V supplied universal power supply here.
4. VGA/Component switch: This dip switch allows users to select a VGA or component video
output. Simply slide the dip switch to the left or right and the output mode will display
your desired selection.
1. CV/SV: Press this button to switch input source between composite or S-Video. The
LED will illuminate in green when switched to composite and red when switched to
an S-Video input.
2. Output resolution switch: This dip switch allows users to set VGA/component output
timing to VESA resolution 1024x768, 1280x1024, 1600x1200 or component video
resolution 480p, 576p, 720p, 1080i, and 1080p. Simply move the dip switch to the
desired resolution.
Note: When setting the output to 1080p, you can switch between 1080p and 1080i
through the OSD. To open the OSD press and hold Input Select for 3 seconds.
3. VGA out: Connect the VGA cable to a VGA display or VGA/component cable to a
component video display.
Panel Description
Front Panel
Back Panel
4